Echo ECLM-58V Traducción De Las Instrucciones Originales página 40

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
● before removing the grass catcher or opening the
grass discharge chute cover
● If the product starts to vibrate abnormally (check
immediately):
inspect for damage, particularly the blades
replace or repair any damaged parts
check for and tighten any loose parts
■ Avoid holes, ruts, bumps, rocks, property stakes,
or other hidden objects. Uneven terrain could cause
a slip-and-fall accident.
■ Always ensure the motor control cable is never
trapped, pinched, or otherwise damaged during
assembly or when folding the handle.
ADDITIONAL SAFETY WARNINGS
WARNING!
Inspection
after
dropping
Thoroughly inspect the product and identify any
problems or damage to it. Any part that is damaged
should be properly repaired or replaced by an
authorised service centre.
Do not dispose of used battery packs in the household
refuse or by burning them. ECHO distributors offer to
retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects
(short circuit risk).
Use only ECBC-58VEU and ECBC-58VUK chargers for
charging the battery pack. Do not use battery pack from
other systems.
Compatible battery packs: ECBP-58V40 and ECBP-58V20
Battery acid may leak from damaged batteries under
extreme load or extreme temperatures. In case of contact
with battery acid, wash it off immediately with soap and
water. In case of eye contact, rinse thoroughly for at least
10 minutes and immediately seek medical attention.
ADDITIONAL BATTERY SAFETY
WARNINGS
WARNING!
To reduce the risk of fi re, personal injury, and product
damage due to a short circuit, never immerse your
tool, battery pack or charger in fl uid or allow a fl uid
to fl ow inside them. Corrosive or conductive fl uids,
such as seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc., can
cause a short circuit.
40
English
OVERLOAD, OVERHEAT, AND TILT
PROTECTION
The product has an overload protection device. When
overloading is detected, the product will automatically
switch off. If the overload protector is actuated, the on-off
button must be released. Press the on-off button to restart
the product.
The
temperatures will cause the battery to stop powering the
product. Feel the battery pack; if it is too warm, allow it to
cool down before resuming operation. If the product still
does not work, recharge the battery.
NOTE: The battery pack LED indicator will not work if the
battery protection feature has caused the battery pack to
stop powering the product. Release the on-off button or
remove the battery pack from the product and the battery
pack LED indicator will resume normal function.
The product also has a tilt protection function. If the product
is tilted beyond 55°, for about 7 seconds, the product will
stop. The product will not function if the tilt angle limit is
or
other
impacts:
exceeded or if the product is in the vertical storage position.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
■ injury caused by vibration
■ injury caused by exposure to noise
■ contact with the blades
■ injury from thrown objects.
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome.
Symptoms may include tingling, numbness, and blanching
of the fi ngers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking, and work practices are all thought to contribute to
the development of these symptoms. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
■ Keep your body warm in cold weather. When using
■ After each period of operation, exercise to increase
product
has
overheat
Always use the right tool for the job. Use designated
handles and restrict working time and exposure.
Wear ear protection and limit exposure.
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
blood circulation.
protection.
Excessive
Tabla de contenido
loading

Este manual también es adecuado para:

Eclm-58v4ahukc

Tabla de contenido