Regional Area Codes - RCA 25205 Manual De Instrucciones

6. Use the touch-tone pad to enter your area code.
NOTE: If you make a mistake, press DELETE to clear all three digits and re-enter the area code. Or use the
navigation button to go to the incorrect digit, and retype in the correct one.
3 or 4
7. When finished, press Sel/Save to save. To start over, press EXIT to return to the PHONE
SETTING menu and repeat step 4.

Regional Area Codes

Depending on your area, you may need to set regional area codes. These are needed in
order for the phone to determine the number format to display when a valid CID signal is
received. Calls received that match any of the regional area codes display as 10 digits. If
the number is not displayed correctly, the phone may not be able to dial back the number.
You can store up to 6 regional area codes.
You may need to use this feature if you have:
• Multiple area codes
• Overlapping area codes
• Areas that require 10-digit dialing.
1. Press the MENU button.
2. Use the 5 or 6 button to scroll to PHONE SETTING.
3. Press Sel/Save button.
4. Use the 5 or 6 button to scroll to REGIONAL CODE.
5. Press Sel/Save.
6. Use the 5 or 6 to scroll to desired code #.
7. Use the touch-tone pad to enter the code. Press DELETE to clear and re-enter all three
digits. Or use the 3 or 4 navigation button to go to the incorrect digit, and retype in
the correct one.
8. When finished, press Sel/Save to save and return to REGIONAL CODE.
Connections and Setup
1