Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Mariner Fan Installation Instructions
•
Ensure the ground wiring is secure and correct, by performing a continuity test from the fan's accessible
metal body back to the ground terminal at the mounting bracket
•
Slide and align the canopy up to the mounting bracket. Ensure all electrical wiring is tucked inside the
canopy and that the wires are not damaged during this step. Secure the canopy to the hanger bracket
using the screws provided.
HOW TO REPLACE THE LED DRIVER
NOTE: Always turn Off the power at the mains switch before attempting to replace the LED driver.
Loosen the screw (A) to lift the top housing (B). Replace the LED driver by unplugging the connectors (C, D).
Reposition the top housing and secure it on the down rod by screw.
7 | P a g e
FINISHING THE INSTALLATION
Fig. 10
Fig. 11
SX-50-L-***-01
Tabla de contenido
