Conceptronic C4USB2BL Guía De Instalación Rápida página 6

ENGLISH
3.1 Installation
The USB hub can work without a power supply, but it is strongly recommended
to use the power supply. When you are not using the power supply only low
power USB devices are supported. (Like flash drives, keyboards, etc).
• Turn on your computer.
• Connect the included power supply to the DC input connector of the USB hub
and to a free wall outlet.
• Connect the included mini-USB to USB cable to the mini-USB port of the USB
hub and to a free USB port on your computer.
The USB hub will be recognized and installed automatically. No driver
installation is required.
3.2 Usage
When the USB hub is connected and installed, you can connect a USB device to
one of the free USB ports.
When you connect a USB device to one of the free USB ports on the USB hub, the
connected device will be recognized automatically.
Depending on your USB device you might need to install a driver for the USB
device.
6
3. Installation & usage
Enjoy the use of your
Conceptronic USB hub !