Environmental Protection; Technical Specifications - Metabo KE 3000 Manual Original

For sealing apply the hot-melt glue in stripes at the
spot to be sealed. The glue can be levelled with a
spatula.
The bonded connections can be dissolved again
using heat.
Protruding glue remains can be removed without
any problems with a heated knife.
Glue drops are removed best when cold.
In case of longer work breaks (more than
30 minutes), pull the plug from the socket, since the
hot-melt glue inside the gun can disintegrate.
Moderate pressure on the feed helps to finely dose
the quantity of hot-melt glue. Excessive pressure
may lead to the hot-melt glue stick getting stuck in
the glue gun and thus blocking the feed: Heat the
glue gun for 10 minutes and pull out the stick.
Should the stick be too deep inside the glue gun,
head a new stick on the glue gun, melt with the
jammed stick and pull out carefully. Caution! Do not
pull the stick all the way out of the glue gun. Hot glue
running into the glue gun may cause damage.
5. Repairs
Repairs to electrical tools must ONLY be
carried out by qualified electricians!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. See
www.metabo.com for addresses.
You can download a list of spare parts from
www.metabo.com.

6. Environmental Protection

Observe the national regulations on
environmentally compatible disposal and on the
recycling of disused tools, packaging and
accessories.
Only for EU countries: never dispose of
power tools in your household waste!
According to European Directive 2012/19/EU
on Waste from Electric and Electronic Equipment
and implementation in national law, used power
tools must be collected separately and recycled in
an environmentally-friendly manner.

7. Technical Specifications

Metabo hot-melt glue sticks:
ø 11 mm, 45-200 mm long.
Supply voltage: 100-240 Volt
Output: heating phase 200 W,
resting phase about 16 W.
Heating time: about 6 minutes
Melting temperature: about 200°C,
electronically controlled
max. adhesive output: 18 g/min
Weight: 0.25 kg
Machine in protection class II
~
AC Power
ENGLISH en
5