Basic Operation - Tripp-Lite BC600SINE El Manual Del Propietario

Quick Installation
This connection is optional. The UPS will function properly without this connection.
USB Communications
Use any USB cable to connect the computer's USB port
to the USB port of the UPS. Download the PowerAlert
UPS monitoring software program appropriate for the
computer's operating system from
www.tripplite.com/software/ and install it.

Basic Operation

Buttons
ON/OFF Button:
201011083.indb 4
optional
Switch the Operating Mode: While the UPS is plugged into a live
AC outlet, press the ON/OFF button and hold it until the UPS beeps
(about 2 seconds) to toggle between ON and OFF.
• ON Mode: ENABLES battery backup. UPS Conditions: The UPS
charges the battery and supplies power to the outlets while
receiving utility line power. The "
If utility power fails, the UPS provides power from battery.
Cold-Start: Cold start the UPS to use it as a stand-alone power
source when utility power is not present (if the UPS battery is
charged). To cold start the UPS, press and hold the ON/OFF button
until the UPS beeps (about 2 seconds), then release it. The "
indicator will illuminate and AC power inverted from stored
battery power will be provided to the outlets.
" indicator light will illuminate.
4 4
"
1/6/2011 9:00:13 AM