Raising Or Lowering The Siderails - Stryker SV2 Manual Del Operador

English

Raising or lowering the siderails

EN
WARNING
• Always lock the siderails in the full up position with the sleep surface horizontal in the lowest position when
transporting a patient.
• Always keep limbs, hands, fingers, and other body parts clear of mechanisms and gaps.
• Always lock the siderails unless a patient's condition requires extra safety measures.
• Always lock the siderails in the full up position when the patient is unattended.
• Do not use siderails as restraint devices to keep the patient from exiting the product. The operator must determine
the degree of restraint necessary to make sure that the patient is safe.
• Do not sit on the siderails.
CAUTION
Do not use the siderails to move the product. Always move the product using the integrated handles in the headboard
and footboard.
You must raise and lower the siderails with both hands. Siderails only lock in the full up position.
When raising the siderails, listen for the "click" that indicates that the siderail is locked in the raised position. Pull on the
siderail to make sure that it is locked into position.
To raise the siderails, grasp and lift the siderail.
To lower the siderails, lift the yellow release latch (A)
1-26
Operation
(Figure 1-18 on page
Figure 1-18: Raising or lowering the siderails
KK-7500 REV 02
1-26) and guide the siderail down.
www.stryker.com