Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CONNECTING THE BATTERY CHARGER TO THE PRG851
The procedure to be followed to connect the batteries to the battery charger is as follows:
•
Remove the fuse "F2" from the programmer circuit board.
•
Connect the batteries to the battery charger (The battery charger must not be powered up!) and close
the jumper "J1" then connect the battery as follows:
- Battery negative connects to binding post "9" - Battery positive connects to binding post "10"
If LED "L1" lights up, the connection is correct; if LED "L1" does not light up, invert the connection to
the batteries; open jumper "J1".
•
Connect the wires to the battery charger terminal board as follows (see fig. 6 det. M):
1
Binding post for the (red) "secondary 2" wire coming from the transformer.
2
Binding post for the (pink) "secondary 2" wire coming from the transformer.
3,4 Binding posts for the (0-24Vac: grey/grey) "secondary 1" wires.
5
Output to be connected to the faston marked "V2"
6
Output to be connected to the faston marked "V0"
7
Output to be connected to the faston marked "V3"
8
Output to be connected to the faston marked "V4"
•
Close the battery charger container and slide it into the battery holder and circuit board unit as shown
in figure 6. det. "L".
•
Insert the terminal block into its seat carefully following the direction indicated in detail "M"
•
Replace the fuse "F2".
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law
6
J1
J1
Rd
Br
Pk
TRANS.
LINE 230V~
1
2
3
4
5
6
7
8
9
10
11
12
13 14
Description : PRG851
Drawing number :
DI0173
Collegamento carica batteria
Product Code :
PRG850BC0
Draft :
P.J.Heath
Date :
17-04-2001
CARDIN ELETTRONICA S.p.A - 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by l
Caution! The transformer for PRG851 has 7 wires:
• Primary:
white/black 0-230Vac
grey/grey 0-24Vac
• Secondary 1:
• Secondary 2:
pink/brown/red
P1
L1
F5
F4
1
2
3
4
5
6
7
8
9 10
24V~
0V~
PRG851
CN2
Motor
V1
V2
V0
V3
15
16
17
18
V4
Drawing number :
Rd = Red
Br = Brown
Pk = Pink
L2
BATT.
12V
BATT.
12V
L
F2
F3
9
Description :
DM0759
M
1 0
9
8
7
6
5
4
3
2
1
BR
Montaggio CARICA BATTERIA
Tabla de contenido
