Door Panel Assembly - golmar 50121535 Manual De Montaje

DOOR PANEL INSTALLATION
D
ouble door panel assembly.
Assembly the door panel A (step 1 ), as it is described in page 26 "Door panel assembly". Bear in mind
that the rod that will join the door panel A and door panel B have to be of the type door panel UNE
rod, see picture below.
Insert a header between door panel UNE rod and the second lateral rod (at the bottom part) and fix it
with the supplied screws (step 2 ) then insert the module (step 3 ). If the door panel is more than one
module insert first the lower module.
Place the spacer module (step 4 ) and insert the next module (step 5 ). Repeat this procedure in case of
doo r panel s with one more module (the maximum numbe r o f module s placed verticall y i s three).
To finish insert the last header between door panel UNE rod and the second lateral rod (at the top part)
and fix it with the supplied screws (step 6 ).
A
Lateral Rod
IMPORTANT: Once finished the adjustments, stick the adhesive gasket (that it is supplied with the set
of closing heads N60XX CMPL) in the
1
Door panel
UNE Rod
Lateral Rod
door panel UNE rod
B
2,9 x 13
DIN-7981
Door panel
UNE Rod
A
.
27
6
5
4
3
Lateral Rod
2
2,9 x 13
DIN-7981