Product Operation - Proscenic CocoSmart 880L Manual Del Usuario

Product Operation

1.Docking station placement
Place docking station against the wall and
remove obstacles from within 0.5 meter at
two sides and about 1.5 meters in front of
the station, as shown in the figure a.
If the robot has been shut down，power
on the robot by pressing the power switch
under the robot cover.
meter
meter
a
3.APP installation
Please download APP"ProscenicHome" by sca-
ning the QR code or in Google Play or App Store.
·After the app installation, please follow the APP prompts
to enter network configuration. With APP, you can get more
robot function after connecting the robot wifi.
·The robot is not compatible with 5Ghz network.
There are two wifi connection modes:EZ mode
and AP mode. If EZ mode fails, please connect
wifi by AP mode.
WIFI CONNECTION MODE 1: EZ mode--
network configuration
Network Configuration
1
Hold down
to enter AP mode
meter
for 3 seconds
2.Press on robot or
operate the robot to go back to the charging
station for recharging as shown in Figure.b.
Note: Power Indicator
Flash red : ＜20%
Flash green:in charging
Solid green light:fully charged
a.When the cleaning task is completed, the host will
automatically return to the charging stand.
b.If the battery runs low, the robot can not be turned
on.Please charge it.
c.The robot cannot be shut down while charging.
d.The charging base is foldable for easy carrying.
e.While charging, please remove the water tank.
f.Place the charging base out of direct sunlight .
Add a Devide
2
EZ mode
3
Enter wifi password
4
06
on remote control to
b
Please select the purchased device
Please select the purchased device
......
LDS-xxxx
Cososmart-860T/880T
Cososmart-860T/880T
M7
H500
......
H600
Click or pull up to load more
Add a Device AP mode
make sure the wifi indicator flashes quickly
indicator flashes quickly