Munchkin MK0035 Instrucciones De Uso página 2

INSTRUCTIONS FOR USE
SAVE FOR FUTURE REFERENCE
• place unit on a flat surface away from the reach of children.
• preheating of the appliance is not necessary.
• The appliance has a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is intended
to fit into a polarized outlet only one way. if the plug does not
fit fully into the outlet, reverse the plug. if it still does not fit,
contact a qualified electrician. Do not attempt to modify the plug
in any way.
• a short power supply cord is provided to reduce the risk of
becoming entangled in or tripping over a longer cord.
To Warm Bottles or Baby Food:
To warm your baby's bottle or food, please follow the instructions in
the chart on page 6.
Note: These instructions are to be used as a guide only. Please note
that there are many variables, such as size of the bottle, ambient
temperature, and starting temperature of the food, which can impact
the speed as well as the final temperature at which this unit warms
the bottle or jar. Adjustments to the instructions below may be
necessary. Always test the temperature of food before feeding baby.
1. Make sure the unit is unplugged from the
1.
wall outlet. when ready to begin, remove
water reservoir from its holder and fill it
with water. Filtered or bottled water will help
reduce the possibility of mineral deposits or
limescale build-up on the heating element.
fill the unit with water via the water reservoir
2.
only. never pour additional water into
the warming Chamber as it can overflow
outside the unit and create a shock hazard.
The water reservoir does not need to be
filled before each use. You need to fill the
4
CCD-0023-000 REV 4
water reservoir only when it is empty.
2. in a rapid motion, place water reservoir
back into the bottle warmer.
3. always place lift-out Basket inside
warming Chamber before positioning your
bottle or jar. never place bottle or jar in
warming Chamber without using the lift-out
Basket. Bottle / jar could be damaged or
overheated.
4. place bottle or jar into warmer. Make sure
bottle or jar does not contact the sides of the
lift-out Basket to allow the passage of water
vapor.
5. place adapter ring on top of the lift-out
Basket. if the adapter ring does not fit
loosely around the bottle or sit flat on top of
the lift-out Basket, do not use. plug the unit
into the wall outlet.
6. Turn the Timer Dial to the desired
duration based on the guide on page 6.
The bell will "ring" to indicate the warming
cycle is complete. The heater will shut off
automatically. remove the bottle / jar at
once so that it will not continue heating. The
Timer Dial must be turned clockwise past the
2 minute mark to function properly. once it has been rotated past the
2 minute mark, it can be rotated counterclockwise to select a duration
less than 2 minutes.
*Many variables affect the functionality of this product, such as;
ambient temperature, shape of the bottle of food jar, temperature
and volume of the contents. Therefore, it is imperative that you check
the temperature of the contents before giving them to the child. This
can be done by shaking or stirring the contents first, then tasting the
food or placing it on the inside of your wrist to ensure that it is the
appropriate temperature for your baby. allow at least 3 minutes for the
unit to cool before next use.
3.
4.
5.
6.
5
CCD-0023-000 REV 4