SportTech FPR300 Manual De Instrucciones página 27

• Store this device indoors, away from moisture and dust. Do not place the device in a garage, outbuilding, on a
covered terrace or near water. If children are allowed to use the device under supervision, their mental and physical
development should be taken into account. They should be assessed, supervised and instructed to use the device
properly. Under no circumstances is the device suitable as a toy.
• This product is designed for a maximum user weight of 120 kg.
• This device is not suitable for therapeutic purposes.
• The free area around the training area in the directions from which the device is accessed must be at least 1.5 m.
The free area must also include the area for getting off the device in an emergency. If devices are set up next to
each other, the free space can be divided among each other. Keep unsupervised children away from the device.
• DO NOT place the device on a surface that will block ventilation openings.
• To protect the floor or carpet from damage or discoloration, you should place a special protective floor mat under
the device.
CAUTION: Parents and child carers should be aware of their responsibility, because the natural instinct to play and
children's preference for experimentation can lead to situations and behavior for which the training device is not intended.
WARNING: Consult your physician before starting any exercise program. This is especially important
for those over the age of 35 or those with pre-existing health problems. It is very important to read all
instructions before using any fitness equipment.
Please note that there can be a weight tolerance of approx. 4% for this product.
IMPORTANT:
The assembly of this device must be carried out
by at least 2 people.
We recommend that you do not fully tighten the
screws and bolts at first to make it easier to as-
semble the power rack.
Make sure, however, that you tighten all screws
and bolts securely after assembly and before
first use.
The training device is according to EN ISO 20957-1: 2013 & EN 957-2:
2003 & EN 20957-8: 2017 certified.
Recycling loop
Packaging material can be conveyed back to the raw material cycle. Dispose of packaging material in accordance with
legal provisions. Information can be retrieved from the return or collections systems of your community.
27
EN