Fein AGSZ18-280BL Manual De Instrucciones página 20

en
20
Character
n
n
0
P
1
P
2
U
f
M...
Ø
L
pA
L
wA
L
pCpeak
K...
h,SG
h,P
For your safety.
Read all safety warnings and all
WARNING
instructions. Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
Do not use this power tool before you have
thoroughly read and completely understood this
Instruction Manual and the enclosed "General
Safety Instructions" (document number
3 41 30 054 06 1). The documents mentioned should
be kept for later use and enclosed with the power tool,
should it be passed on or sold.
Please also observe the relevant national industrial
safety regulations.
Intended use of the power tool:
Hand-guided straight grinder for dry grinding of metal
with small grinding accessories (grinding points) for
shaping metal with hard metal cutters and for cut-off
grinding.
Unit of measurement,
international
-1
/min, min , rpm, r/min rpm
-1
/min, min , rpm, r/min rpm
W
W
V
Hz
mm
mm
mm
mm
mm
kg
kg
kg
dB
dB
dB
2
m/s
2
m/s
2
m/s
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2
min, m/s
Unit of measure- Explanation
ment, national
Rated speed
No-load speed
W Power input
W Output
V Rated voltage
Hz Frequency
mm Size of metric thread
mm Diameter of a round part
mm Ø
mm Ø
mm Ø
kg Weight according to EPTA-Procedure 01
kg Weight of the power tool without battery
and application tool
kg Weight of the battery
dB Sound pressure level
dB Sound power level
dB Peak sound pressure level
Uncertainty
2
m/s Vibrational emission value according to
EN 60745 (vector sum of three directions)
2
m/s Vibrational emission value (surface grinding
with straight grinder)
2
m/s Vibrational emission value (polishing with
straight grinder)
m, s, kg, A, mm, V, Basic and derived units of measurement
W, Hz, N, °C, dB, from the international system of units SI.
2
min, m/s
AGSZ18-90 LBL: This power tool is additionally
intended for wire-brushing and polishing in weather-
protected environments with the accessories recom-
mended by FEIN.
Safety warnings common for grinding, wire
brushing, polishing, carving, sanding or abrasive
cutting-off operations:
AGSZ18-280 BL, AGSZ18-280 LBL: This power tools are
intended to function as a grinder, carving or cut-off
tools.
AGSZ18-90 LBL: This power tool is intended additionally
to function as a wire brush or polisher.
Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to
follow all instructions listed below may result in electric
shock, fire and/or serious injury.
AGSZ18-280 BL, AGSZ18-280 LBL: Operations such as
sanding, wire brushing or polishing are not recom-
mended to be performed with this power tools.
=Max. diameter of grinding wheel
D
=Max. diameter of hard metal cutter
D
=Max. diameter of polishing tools
D