Tabla de contenido
System connections (continued)
■
Connecting to TV (with HDMI)
Caution:
●
Turn off all other equipment before making this connection.
●
Set the TV at low volume before turning on the system.
Notes:
●
This unit supports HDMI which enables ARC (Audio Return Channel).
●
To enable ARC make sure to use High Speed HDMI cable (ver 1.4 with ARC).
●
This ARC feature requires TV that supports ARC. Refer the operation manual of the TV to determine which terminal
support ARC.
●
To listen to the sound from non-ARC-compatible TV, connect the audio output from TV to this system's AUDIO IN (TV)
terminal. (refer page 9)
●
This unit can be operated (power on/off or volume up/down) via a TV or similar component which supports HDMI CEC
(Consumer Electronics Control). If this does not work, it does not mean this system is faulty. Refer to the operation
manual of the respective component on how to activate the CEC.
Example: Go to the Menu of the component to search and enable the CEC. Different brands may have different naming
for the CEC. For Sharp LCD TV, it is named as AQUOS LINK.
●
To listen to the sound from this system, you will need to adjust settings within the TV Menu. For details, refer to the
operation manual of the TV.
●
If you are unable to select an external speaker setting from the TV menu (for Sharp LCD TV, it is named as AQUOS
AUDIO SP), turn the CEC OFF and ON again.
●
Make sure the LCD TV Audio output setting is set to PCM, not other formats such as Dolby Digital, DTS, etc.
●
To enjoy 3D images, this system must be connected to a 3D-compatible TV and components (3D BD player, etc.) via
High Speed HDMI cables. Put on the 3D glasses. Otherwise 3D images may not be viewed properly.
Select from the 2 methods below:
1. Method 1
This connection is for HDMI TV with ARC (Audio Return Channel).
Notes:
●
Refer to the operation manual of the equipment to be connected.
●
Fully insert the plugs to avoid fuzzy pictures or noises.
All manuals and user guides at all-guides.com
TV
To HDMI (ARC)
terminal
To HDMI
output
terminal
E-7
DVD, BD player
or similar
To HDMI output
terminal
Tabla de contenido
