Rubi DM-500 Manual De Instrucciones página 20

6.- FITTING ROLLER UNIT
The roller unit must be installed on the front side of the machine (fig.9).
9
10
ENGLISH
After the roller unit has been installed on the guide fitted to the water tank, it must be
levelled to align it with the machine. Place a spirit level directly on the roller unit and
level the roller unit with (17 mm) open-ended spanner on the levelling screws (fig.10-N)
and an (8 mm) hexagonal key on the guide fixing screws (fig.10-O).
Connect the extension roller table to the pneumatic plan (fig.11-U) located under the
guide.
O
11
7.- DEPOSIT AND WATER PUMP
N
12
-20-
U