Rear Panel - Intellinet Network Solutions 561297 Guia De Inicio Rapido

48-Port Gigabit Ethernet Switch with 10 GbE Uplink English

Rear Panel

Power
Use the included power cord to connect the device (on the rear panel) to an AC outlet. The device supports
AC 100~240V, 50/60Hz.
Chassis Ground Screw
Located on the right side of the power supply connector, the grounding terminal connector is used to provide
proper grounding for your Intellinet data switch. If you use the chassis grounding screw, it should be wired to
an object that provides earth ground. In rackmount installations, grounding is typically provided by the metal
frame of the mounting rack.
Placement
Desktop Installation
Prior to use, it is recommended that the switch be placed/positioned on a level surface with at least 25 mm
(approx. 1") of clearance for ventilation; away from sources of electrical noise: radios, transmitters, broadband
amplifiers within 100 m (approx. 328') of network devices it's to be connected to.
Rackmount Installation
The switch can be mounted in an EIA standard-sized, 19-inch rack.
Attach the mounting brackets on the switch's side panels (one on each side) and secure them with the screws
provided.
Use the screws provided with the equipment rack to mount the Intellinet data switch on the rack.
3