Test Preparation; Battery Test - BGS technic 2133 Manual Del Usuario

TEST PREPARATION


Before you test a battery in a vehicle, turn off the ignition, all accessories and loads. Close all the
vehicle doors and the trunk lid.

Make sure you have put 1.5V x 6 pcs internal batteries into the tester (lf the LCD screen shows
"POWER LOW", then the internal batteries need to be replaced).

Clamp the black load lead to the vehicle negative battery terminal (-). Clamp the red load lead to
the vehicle positive battery terminal (+).

BATTERY TEST

Rating
Standard
JIS
[ENTER]
GOOD PASS
YES
[ENTER]
STANDARD
JIS: Japanese Standard
SAE: United States Standard
EN: European Standard
DIN: German Standard
CA: Normal starting current or maritime starting current
IEC: lnternational electrical science and technology association
TESTING RANGE
JIS:
SAE: 40 - 2000 CCA
DIN:
The value will rise or fall five units each time, JIS every time for a unit:
SOH: State of health
SOC: State of charge
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
BATTERY TYPE
REGULAR LIQUID
[ENTER]
RATING RATING
Standard Standard
SAE
[ENTER] [ENTER]
SOH XX%
[ENTER]
PRINT RESULT
YES
[ENTER]
Press ENTER button to confirm and return to the main interface
40 - 2000 CCA
25 - 1300 CCA
Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
BATTERY TEST
XX.XX V
[ENTER]
BATTERY TYPE
AGM
[ENTER]
RATING
Standard
CA EN
[ENTER]
RATING
CAPACITY
XXX JIS
[ENTER]
SOC XX%
[ENTER]
PRINT RESULT
NO
[ENTER]
CA: 240 - 1400 CA (MCA)
EN: 40 - 2100 CCA
IEC: 30 - 1500 CCA
BATTERY TYPE
VRLA / GEL
[ENTER]
RATING RATING
Standard Standard
DIN IEC
[ENTER] [ENTER]
IR XX.XX mΩ
[ENTER]
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed