Tabla de contenido
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Unplug the unit before cleaning or performing repairs or
maintenance.
1. Change the dust bag: when the dust full indicator turns
red or loss of suction is noticed, it is time to clear the
dust bag or replace with a new bag. (Fig 10)
l Open the front cover by touching front cover button.
(Fig 11)
l Take out the bag holder then remove the full dust
bag. (Fig 12)
Installing the dust bag: insert the dust bag into the bag
holder and then put it in the slot cabinet. (Fig 13)
Note: If the dust bag is not installed, the front cover
can't be closed
2. Inlet filter: clean the filter with warm water and allow to
dry fully before placing back into the unit. (Fig 14)
Replacing the inlet filter: clip down and remove the inlet
cover, remove and replace with a suitable filter.
25)
3. Clean the outlet filter: open the outlet cover and take out
the HEPA frame and filter. Wash it and install it after the
filter has fully dried. (Fig 16/17)
(Fig
Tabla de contenido
