Roubleshooting Uide - GE 27939 Guia Del Usuario

T
ROUBLESHOOTING
T
ELEPHONE
Problem
No dial tone
Dial tone is OK,
but can't dial out
Handset/Base does
not ring
You experience static,
noise, or fading in and out
Unit beeps
G
UIDE
Solution
• Check installation:
— Is the base power cord connected to a working outlet?
— Is the telephone line cord connected to the base unit
and the wall jack?
• Connect another phone to the same jack; the problem
might be your wiring or local service.
• Is the cordless handset out of range of the base?
• Make sure the battery is properly charged (12 hours).
• Is the battery pack installed correctly?
• Did the handset beep when you pressed the TALK/callback
button? Did the charge/page indicator on the base come
on? The battery may need to be charged.
• Place handset in charge cradle for at least 20 seconds.
• Make sure the TONE/PULSE switch on the base is
set to the type of phone service you are subscribed to.
• Make sure the handset ringer switch is turned to on and
the base ringer is programmed to HI.
• Move closer to the base. The handset may be out of range.
• You may have too many extension phones on your line. Try
unplugging some phones.
• Check for dial tone.
• Change channels.
• Move closer to base (cordless handset might be out
of range).
• Does the base need to be relocated? Make sure base is not
plugged into an outlet with another household appliance.
• Charge battery.
• Place the handset in the cradle for 20 seconds. If it still
beeps, charge battery for 12 hours.
• Clean charging contacts on cordless handset and charger
with a soft cloth, remove comma or an eraser.
• See solutions for "No dial tone" on previous page.
• Replace battery.
39