Using Your Card Reader; Customizing Drive Icons - Dynex DX-CRD12 Guia Del Usuario

Using your card reader

Windows 98SE and Windows ME
To install the driver in Windows® 98SE or Windows® ME:
1 Save all files and close all programs.
2 Insert the utility CD into your CD drive.
3 Open the Driver folder, then open the Windows folder.
4 Double-click on the setup.exe file.
5 Click Next, then follow the on-screen instructions to install the driver.
6 After the driver installation is complete, restart your computer.
Your card reader is ready to use. Make sure that you insert the correct type card into the
appropriate slot. For more information about which cards each slot accepts, see
"Front" on page 4.
If you want to customize the card reader drive icons in the Windows Explorer and My
Computer windows, see "Customizing drive icons" on page 9.
Using your card reader

Customizing drive icons

To make the slots easier to recognize, you can customize the drive icons.
To customize the drive icons:
1 Save all files and close all programs.
2 Insert the utility CD into your CD drive.
3 Open the Driver folder, then double-click on the setup.exe file.
4 Click Next to start the installation, and follow any on-screen instructions.
5 After the installation is complete, restart your computer. Windows
drive icons for the slots instead of the standard Windows drive icons.
When Windows detects a card in a slot, the corresponding drive icon turns from grey to
a color that indicates the card type.
Using a media card
To use a media card:
1 Insert a card into the appropriate slot. For more information about which slot to use, see "Front" on page 4.
2 Open the My Computer or Windows Explorer window, then double-click the drive icon
for the slot you are using.
3 Use normal Windows procedures for opening, copying, pasting, or deleting files and
folders to access files and folders on the inserted card.
9
displays the new
®