hager EE610 Manual De Instrucciones página 11

Action Settings
Use Auto settings Auto Settings
(factory) or set by Put the lux potentiometer on
the remote control "auto test".
A B
to switch the light The settings are predefined:
Lux =
automatically for a , (operating at night only)
given time. time = 3 min,
sensitivity = min.
Remote control settings
(manual settings inhibited).
Automatically Installer settings
switch on the light
for a defined time.
Briefly turn on
Impulse
the light.
Auto settings are usable with
time = 5 s. (cannot be changed).
Test and validate Test mode
the detection zone. Move the potentiometer
"auto test". On this position,
the remote control can be used.
After 3 min without detection of
movement, the product returns to
normal operation.
9 9
Potentiometer
to
B
Using the remote control
(option: ref. EE806 / 52900)
The detector receives instructions from the
remote control when the lux potentiometer
on the "auto test" position.
If the potentiometer is put on another value, the
local setting resumes.
The LED of the detector lights up to confirm the
signal with the remote control.
It flashes quickly for 2 s when an instruction is
received and 5 s for a reset.
When an instruction is not authorised, the LED
lights up for 1 s.
The available settings are:
- fixed time,
- level of luminosity,
- sensitivity (detection area),
- on / off,
- holidays,
- auto,
- reset (return to factory settings),
- test.
Potentiometer Values in lux
position
≤
5
≈
50/ 60
>
1000
B is
6LE000756E