Settings; Using The Remote Control - hager EE600 Manual De Instrucciones

Action

Settings

Auto Settings
Use Auto settings
(factory) Put the Lux potentiometer on
or set by the "auto test".
remote control The settings are predefined :
to switch the light Lux = , (operating
automatically at night only)
for a given time. time = 3 min,
sensitivity = max.
Remote control settings
Remote control settings
(Manual Settings inhibited).
Automatically Installer settings
switch on the light
for a defined time.
Briefly turn on
Impulse
the light.
Auto settings are usable with
time = 5 s.
(cannot be changed).
Test and validate Test mode
the detection zone. Move the potentiometer 2 to
"auto test". On this position,
the remote control can be used.
After 3 min without detection of
movement, the product returns to
normal operation.
Adjust the Allows setting the range
sensitivity. to avoid disturbance.
9
Potentiometer

Using the remote control

(Option, ref. EE806/ 52900)
The detector receives instructions from the
remote control when the Lux potentiometer 2 is
on the "auto test" position.
If the potentiometer is put on another value, the
local setting resumes.
The LED of the detector lights up to confirm the
signal with the remote control.
It flashes quickly for 2 s when an instruction is
received and 5 s for a reset.
When an instruction is not authorised, the LED
lights up for 1 s.
The available settings are :
- fixed time,
- level of luminosity,
- sensitivity,
- on / off,
- holidays
- auto
- reset (return to factory settings)
- test.
Potentiometer Values in lux
position
≤
5
≈
50/ 60
<
1000