Holiday living 216-151100150-2 Manual Del Usuario página 4

ASSEMBLY INSTRUCTIONS
1. Place all the parts flat on the floor.
Align the two halves of the mother bear's body
(A) together. Insert the metal rod on one body
half into the corresponding hole on the other
half.
Insert the two metal rods of each mother bear's
leg (C) into the corresponding holes at the
bottom of the body (A).
Repeat the above steps for the baby bear's body
(F) and the baby bear's legs (H).
2. Insert a plastic tie (AA) through each pair of
matching rings on the mother bear's body
halves and fasten them together.
Insert the metal rod of each mother bear's arm
(D) into the corresponding hole on each side of
the body assembly.
Insert the two metal rods of the mother bear's
head (B) into the corresponding holes on top
of the body.
Repeat the above steps for the baby bear's
body (F), head (G) and arms (I).
Hardware Used
Plastic Tie
3. Insert a plastic tie through each pair of
matching rings on the mother bear's head (B)
and body assembly (A) and fasten them
together.
Wrap the mother bear's scarf (E) around her
neck.
Repeat the above steps for the baby bear.
Secure the figures to the ground using the
ground stakes (BB) provided.
Plug into a properly grounded receptacle.
Hardware Used
Plastic tie
Ground stake
x 8
x 8
x 4
4
4
1
2
3