Klarstein Florentina IR Manual Del Usuario página 20

EN
20
3. The grouping symbol in the display will start to flash, press [+] or [-] to choose the
group you want to set. You can totally set 4 groups per day from P1 to P4. Press SET
again to start to set the time of power on for the selected group.
• The symbol of ON will be lighten in the display after that, and the [--] symbol
for hour start to flash. Press [+] or [-] to choose the hour that you want to let the
heater power on. Press SET again and the [--] symbol for minute will start to
flash.
• Press [+] or [-] to choose the minute. Press SET button again to set the time
you want to let the heater power off. The symbol of OFF will be lighten in the
display after that, and the [--] symbol for hour start to flash
• Press [+] or [-] to choose the hour that you want to let the heater power off.
Press SET again and the [--] symbol for minute will start to flash.
• Press [+] or [-] to choose the minute. After this, the first timer group is set
successfully.
• Press SET again, the WEEK symbol will start to flash, and you can set another
group of timer for the same day you set as above or choose another day to set
the timer. The way of operation is same as explained above.
4. After the operation of step 3, you can press the TIME button or leave it without any
operation for more than 10 seconds to finish the week timer setting.
How to set the system time
Press TIME button when the heater is power on, and the [--] symbol for hour will start to
flash. Press [+] or [-] to set the right hour. Press SET button and the [--] symbol for minute
start to flash. Use [+] or [-] to set the right minute. Press SET button and the WEEK symbol
will start to flash. Press [+] or [-] to set the right week. Press SET again to quite the system
time setting.
How to set the temperature
Press TEMP button to start the setting, and press [+] or [-] to choose the temperature you
need. Press SET to finish the setting.