Installation On Ceiling Fan Cf5100 & Cf5200 - Luminance Brands AL200 Manual Del Usuario

5. Installation for Ceiling Fan CF5100 & CF5200
5.1
Position the LED Accent Light Fixture so that the
Downrod passes through the opening of the LED
Accent Light Fixture .
Align the LED Accent Light Fixture Female 2-Pin
Connector with the Motor Housing Assembly Male
2-Pin Connector (Figure 9) .
NOTE: Be sure the LED Accent Light Fixture
Connector is located close to the Motor Housing
Assembly Connector for ease of installation.
5.2
Install the LED Accent Light Fixture to the Motor
Housing Assembly using the three #8-32 Pan Head
Screws (supplied) (Figure 10) .
WARNING
!
To avoid possible fire or electric shock, be careful
not to pinch wires under the LED Accent Light Fixture
during assembly.
5.3
Securely engage the LED Accent Light Fixture Female
2-Pin Connector with the Motor Housing Assembly
Male 2-Pin Connector (Figure 11) .
For storage of excess Connector Wire, tuck the
Connector Wire along inside edge of the LED Accent
Light Fixture (Figure 11) .
LIGHT FIXTURE
FEMALE 2-PIN
CONNECTOR
LIGHT FIXTURE
FEMALE 2-PIN
CONNECTOR
MOTOR HOUSING
ASSEMBLY MALE
2-PIN CONNECTOR
MOTOR HOUSING
ASSEMBLY MALE
2-PIN CONNECTOR
Figure 9
#8-32 x 8mm #8-32 PAN
PAN HEAD HEAD
SCREWS (3)
SCREWS (3)
LED ACCENT
LIGHT
FIXTURE
MOTOR
HOUSING
ASSEMBLY
Figure 10
CONNECTOR
WIRE STORAGE
LIGHT FIXTURE
FEMALE 2-PIN
CONNECTOR
MOTOR HOUSING
ASSEMBLY MALE
2-PIN CONNECTOR
Figure 11
7
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: AL200