Tripp-Lite PDU3EVN3L2130 El Manual Del Propietario página 13

Using the LCD Touchscreen
21-03-434-93349E.indb 13 21-03-434-93349E.indb 13
Environment
Press Environment on the drop down menu to view a panel for
each E2 module connected to the PDU. Use the
other E2 modules.
Note: The available information will vary based on the E2 module.
Mobile Access
A unique QR code is generated each time the Mobile Access
panel is accessed. Make sure the PDU and mobile device are
on the same network. Scan the code with a QR code reader on
your mobile device for read-only access to the PowerAlert Device
Manager.
When accessed through the QR code, PowerAlert Device Manager
is in read-only mode. To access the PDU with full read/write control
from a mobile device on the same network, enter the device's IP
address in your browser and login to PowerAlert Device Manager as
a user with read/write credentials.
Note: If the Mobile Access panel is blank, a QR code will not be generated
until a valid static or dynamic IP address is assigned to the PDU.
13
and to view
4/5/2021 4:11:50 PM 4/5/2021 4:11:50 PM