Kohler K-118 Guia De Instalacion página 4

Escutcheon
2. Install the Handle Valve
Slide a gasket onto each valve body until it is snug against the
underside of the escutcheon.
NOTE: The valve body marked "COLD" with a blue tape must be
installed into the mounting hole on the right as viewed from the
front of the sink.
From the top of the sink, insert the valve bodies into the
mounting holes.
From the underside of the sink, slide a washer and a nut onto
each valve body.
Rotate each valve body until the copper tubing faces towards the
outside of the sink.
Firmly hold the valve bodies in place and securely tighten the
nuts with a wrench. Do not overtighten.
113744-2-BB
Valve
Body
Gasket
Nut
Washer
4 Kohler Co.