Maintenance Free Battery - Briggs & Stratton Snapper LT75 Serie Manual Del Operador

Assembly
Mount the Grass Bag
1. Mount the grass bag assembly onto the rear bag-
ger brackets as shown (see F F igure 5).
a. Use one hand to grab onto the handle at the
rear of the bag frame assembly.
b. Use the other hand to hold the top bagger han-
dle and guide the bag frame assembly onto
the rear bagger brackets.
1
2
2. When mounting the bagger frame assembly, hold
the bottom of the grass bagger assembly slightly
away from the rear plate.
3. Rotate the grass bagger assembly until it locks in
place.

Maintenance Free Battery

IMPORTANT: Before you attach the battery cables to
the battery, check the battery date. The battery date
tells if the battery must be charged.
1. Raise the seat support (s s ee Figure 2).
2. Remove two screws (1) and battery cover (2) (see
Figure 6).
3. Check the side of the battery (3) for the location of
the battery date.
a. If the battery is put into service before this
date, the battery cables can be attached
without charging the battery. See "Install the
Battery Cables."
b. If the battery is put into service after this date,
the battery must be charged. See "Charge the
Battery."
3
Figure 5
7
2
4
5
6
en
1
8
Figure 6
11