ARDES AR5M41 Instrucciones Para El Uso página 22

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54
BATTERIES
Remote control is supplied with battery inside (CR2025 type); remove
the transparent sheet from the battery cover before use remote control.
When the battery is over, it must be replaced with the same type following
the drawing on the back of remote control.
ON/OFF Button (A):
• Press On/Off button one time to activate the fan. The indicator light
(7) will on on the control panel. You can now press MIST (F) button to
select the misting function without fan operation (mist only).
• Press On/Off button a second time to turn on the fan: the unit will
operate at low speed and the related indicator light (4) will be on on
the control panel. You can now select other functions (speed, mode,
timer, mist).
• Press On/Off button when the unit is on to turn off it.
SPEED Button (B):
• To start the fan at low speed, press On/Off button (A) twice (when unit
is Off): the unit will operate at low speed and the related indicator light
(4) will be on on the control panel.
• Press speed button one time to select the medium speed: the related
indicator light (4) will be on on the control panel.
• Press speed button another time to select the high speed: the related
indicator light (4) will be on on the control panel.
Cyclic function.
MODE Button (C):
• When you press the On/Off button twice, the fan will operate in Normal
mode (there isn't any indicator light in the control panel that indicate
this mode).
• Press mode button one time to change to Natural mode: the unit
simulates a natural breeze mode and the related indicator light (1) will
be on on the control panel.
• Press mode button another time to change to Sleeping mode: the
unit simulates a soft breeze suitable for night time use. The related
indicator light (2) will illuminate on the control panel.
• Press again mode button to change to Normal mode (there isn't any
indicator light in the control panel that indicate this mode).
Cyclic function.
TIMER Button (D):
• When the unit is operating, you can set the timer to switch the fan
off automatically after the set time. Press the timer button repeatedly
to select the desired time period in half hours increments: 0,5h, 1h,
1,5h ....7,5h. The related indicator light (5) will illuminate on the control
22
Tabla de contenido
loading

Tabla de contenido