Buttons And Functions - Klarstein Heat'n Beat Manual Del Usuario

BUTTONS AND FUNCTIONS

Switch Appliance On/Off
Press this button to turn ON the fireplace. The appliance will beep.
Press again to turn off the fireplace and the fan will continue to work
for 30 seconds without heat. The heater is preset to start with high heat
(1800 W) and the highest flame intensity.
Activate Flame Effect
Press this button once for the flame effect. The appliance will beep.
Press again to increase the flame intensity. There are six light intensities to
choose from. The flame optics will go lower under the sequence of 6, 5, 4,
3 ,2 and 1. Press the button again to stop the flame effect.
Select Heating Level
900 W: Press this button for low heat level. The indicator light will be ON. The
heater will provide low heat level. Press once again to stop the low heat
level function.
1800 W: Press this button for high heat level. The appliance will beep. The heater
will provide high heat level. Press once again to stop the high heat level
function.
Temperature Control
To adjust the temperature to your individual requirements, turn the temperature control
dial to the right (clockwise) to increase the temperature and to the left (counter
clockwise) to decrease the temperature.
When desired ambient temperature is reached, the heater will automatically stop
heating. When the ambient temperature drops below the desired temperature 2 °C, the
heater will resume heating.
O/I Switch
Press this switch for playing music (via Bluetooth) and power charging ("I"). When the
O/I switch is turned off ("O"), Music playback and charging will stop.
EN
19