Kohler K-6536 Guia De Instalacion página 6

Front Support
Support Frame
Frame Member
36"
(91.4cm)
Opening
33-5/8" (85.4cm) Max.
33-3/8" (84.8cm) Min.
4. Support Frame Installation
Tile-In Installations
This sink is designed to be installed flush with or slightly lower
than the surrounding tile. Measure and compare the thickness of
the sink rim and tile. The rim thickness on this sink is plus or
minus 1/32" (1mm). Take these measurements into consideration
when determining the support frame placement. Because of the
varying thickness of the tile and sink, or if adhesive or mortar
bed installation is used, you may need to make allowances to
shim the sink, or route the underlayment as required.
Undercounter and Solid Surface Installations
Position the support frame in the cabinet opening so when
installed, the top of the sink will be level and flush with the top
of the cabinet.
All Installations
NOTE: Ensure that the securing hardware will not penetrate
through the cabinet walls.
Secure the support frame to the cabinet. Position the securing
hardware to allow for easy removal should the sink need to be
removed or replaced.
1019951-2-A 6 Kohler Co.