Using Your Camera - ION CAMOCAM Guida Rapida

4 Lens
MicroSD Card
5
Slot
6 Mic Jack
7 Mini HDMI Jack
Video Resolution
8
Switch
9 USB Port
10 Reset Button
11 PODZ Socket

3. Using Your Camera

3.1 Charging up Your Camera
Charge your camera with either the USB cable or Dual USB car adapter. The red LED will
light up to indicate the camera is charging and it will turn off once the camera has been fully
charged. It takes approximately 3 hours to fully charge the camera.
3.2 Inserting a Memory Card
Insert a MicroSD card up to 32GB (not included) before using your camera. Ensure that the
camera power is turned OFF before inserting the card into the slot.
Notes:
1. There is only one correct direction to insert the MicroSD card into the slot. Do not force
the card into the card slot as it may damage both the camera and the MicroSD card.
2. A new MicroSD card should be formatted before using. For more information, please
see section 7.2.
High quality lens
MicroSD card storage location.
To enable you to connect to an external microphone (not
included). Please note when an external microphone is being
used the camera is no longer waterproof.
To enable you to connect the camera to an HDTV with an HDMI
cable (not included)
Select video resolution: FHD (Full HD) or HD.
1. Connect to your computer for data transfer or camera setup
2. Charge your camera
Reset the camera
Connect any PODZ to the camera to perform additional
functions. Also acts are waterproof barrier.
EN-4