Uline H-7690 Manual De Instrucciones página 3

1. Back Angle – To tilt the back, lift the lever and move
freely. To lock tilt position, push lever down while
sitting at preferred angle.
2. Seat/Back Tilt – To adjust seat/back angle, lift lever
up. Chair has standard tilt; the seat and back tilt
simultaneously at the same ratio.
3. Adjustable Tilt Lock – To lock seat/back angle, press
lever down at desired angle.
4. Seat Depth (Seat Slider) – To adjust seat depth, pull
lever out and slide the seat forward or back while
sitting. Release lever to lock in desired position.
5. Seat Height Adjustment – To raise seat height, lift
lever up with little to no weight on the seat. To lower
seat height, lift lever up while sitting.
6. Forward Tilt – To use forward tilt, the back angle
lever (1) must be down, and the seat/back tilt lever
(2) must be up. Once levers 1 and 2 are in correct
position, sit all the way back in the seat, lean back,
pull back on lever (6) and then lean forward. To stop
forward tilt, lean back and push lever (6) toward the
front of chair.
PAGE 3 OF 9
CHAIR ADJUSTMENTS
4
2,3
6
1
5
1-800-295-5510
7. Tilt Tension – To increase tilt tension, turn knob
clockwise. To decrease tilt tension, turn knob
counterclockwise.
8. Back Height Adjustment – To raise the back, lift the
back until it clicks into the desired height. To lower
the back, lift the seat back to its tallest height to
release ratchet mechanism. Then, push it down to
the lowest height setting.
9. Armrest Adjustment:
• Height – To adjust arm height, press the button
under the front of each armrest and move the
arm up or down.
• Width – To adjust arm width, push armrest pad in
or out.
• Depth – To adjust arm depth, push armrest pad
forward or backward.
8
uline.com
9
7
0521 IH-7690