Installation; Electrical Connection - IFM Electronic efector 110 GI5002 Instrucciones Operativas

6. Installation

Free space at the sensing face when mounted in metal (figure 1).
Minimum distances when several switches of the same type are
mounted (figures 2 and 3).
1
30
Since the inductive fail-safe switch reacts to metallic objects, corre-
sponding measures must be taken to avoid metallic objects being
placed on the sensing face intentionally or unintentionally (see EN
1088, Interlocking devices associated with guards).

7. Electrical connection

The unit must only be connected by a skilled electrician.
All relevant standards (e.g. calculation of the safety distance to
the danger area of the machine) must be complied with.
Disconnect the installation from power. Connect the unit as in-
dicated on the type label.
14
Fasten the unit securely with a mounting
fixture. In case of high mechanical stress
secure it so that it does not come loose.
The unit is flush mountable.
2
80
3
60