Troubleshooting; Warranty; Parts Replacement - Litex Industries E-AVA52BNK5CR Guia De Instalacion

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Troubleshooting.

Problem: Fan fails to operate.
Solutions:
1. Check wall switch to fan.
2. Verify that reverse switch is set completely in either
direction.
3. Check to be sure code switches in remote control
transmitter and receiver are set properly.
4. Check to be sure fan is wired properly.
Problem: Light kit not lighting.
Solutions:
1. Check wall switch to fan.
2. Check that bulbs are installed correctly.
3. Check to be sure code switches in remote control
transmitter and receiver are set properly.
4. Check to be sure wires in canopy are wired properly.
5. Check to be sure that bulbs total no more than 190W.
[Note: Lamping fan with bulbs that total more than 190W
will cause the wattage limiting device to interrupt the flow of
electricity to the light kit.]
Problem: Fan operates but light fails.
Solutions:
1. Check that bulbs are installed correctly.
2. Check to be sure wires in canopy are wired properly.
3. Verify that molex connections from the light kit fitter
are connected properly.
4. Replace defective bulbs with same type of bulb.
5. Check to be sure that bulbs total no more than 190W.
[Note: Lamping fan with bulbs that total more than 190W
will cause the wattage limiting device to interrupt the flow of
electricity to the light kit.]
Problem: Fan and light fail to operate with remote
control.
Solutions:
1. Check battery power to remote control.
2. Check to be sure code switches in remote control
transmitter and receiver are set properly.
Problem: Fan wobbles.
Solutions:
1. Use the balancing kit in one of the hardware packs. If
no blade balancing kit is provided, please call Customer
Support, 1-800-527-1292, to request one.
2. Check to be sure set screw(s) on motor housing yoke
is (are) tightened securely.
3. Check to be sure set screw on hanging ball is
tightened securely.

Warranty.

LITEX LIFETIME LIMITED WARRANTY:
LITEX INDUSTRIES, LTD. warrants this fan to the original
household purchaser for indoor use under the following
provisions:
1-YEAR WARRANTY: LITEX INDUSTRIES, LTD. will replace or
repair any fan which has faulty performance due to a
defect in material or workmanship. Contact Litex Customer
Service at 1-800-527-1292 to arrange for return of fan.
Return fan, shipping prepaid, to Litex Industries, LTD. We
will repair or ship you a replacement fan, and we will pay
the return shipping cost.
5-YEAR WARRANTY: LITEX INDUSTRIES, LTD. will repair or
replace, at no charge to the original purchaser, any fan
motor that fails to operate satisfactorily when failure
results from normal use.
RETURN FAN MOTOR ONLY, shipping prepaid, to Litex
Industries. We will repair or ship purchaser a replacement
motor and Litex will pay the return shipping cost.
6-YEAR to LIFETIME LIMITED WARRANTY: LITEX
INDUSTRIES, LTD. will repair the fan, at no charge to the
original purchaser for labor only, if the fan motor fails to
operate satisfactorily when failure results from normal use.
Parts used in the repair will be billed to the purchaser at
prevailing prices at time of repair.
The purchaser shall be responsible for all costs incurred
in the removal, reinstallation and shipping of the product
for repairs.
This warranty does not apply when damage from
mechanical, physical, electrical or water abuse results in
causing the malfunction. Deterioration of finishes or other
parts due to time or exposure to salt air is specifically
exempted under this warranty.
Neither Litex Industries nor the manufacturer will
assume any liability resulting from improper installation or
use of this product. In no case shall the company be liable
for any consequential damages for breach of this, or any
other warranty expressed or implied whatsoever. This
limitation as to consequential damages shall not apply in
states where prohibited.

Parts Replacement.

For parts and information, please refer to
"Parts Inventory" on page 2.
Litex Customer Support:
1-800-527-1292
page 9

Capítulos

Tabla de contenido
loading

Tabla de contenido