Kohler 1900A Serie Guia De Instalacion página 7

#8-32 x 3/8"
Roller Screw
5. Install the Rollers to the Moving Panel
Assemble two rollers on each moving panel with #8-32 x 3/8" roller screws.
Ensure the steel side of the roller is against the top frame flange.
6. Install the Plastic Clips
Insert a plastic clip into each panel guide slot of the bottom frame of the moving panel.
Verify the plastic clips are completely pushed all the way down into each slot.
Repeat this procedure for the other moving panel.
Sterling
Steel Side of Roller against
Top Frame Flange
Moving Panel
Bottom
Frame
7
Plastic
Clip
Panel
Guide Slot
1034044-2-B