ENGLISH
•
Do not leave the appliance unattended while plugged in.
•
Do not place the appliance on any soft furnishings.
•
Do not use attachments other than those we supply.
•
Do not set the appliance down while still on.
•
Do not twist or kink the cable, or wrap it round the appliance.
•
Do not use the appliance if it is damaged or malfunctions.
•
Check the cord regularly for any sign damage.
•
Let the attachments cool before removing.
•
This appliance is not intended for commercial or salon use.
PARTS
1. 1200W power handle
2. 21mm thermal bristle brush
3. 30mm retractable bristle curling brush
4. Root boost attachment
5. Paddle brush
INSTRUCTIONS FOR USE
1. Wash and condition your hair as normal.
2. Squeeze out excess moisture with a towel and comb through.
Hairsprays contain flammable material – do not use while using this product.
3. Select your attachment before you turn on the appliance.
4. Attachments can be connected by aligning the arrows on the attachment and the
handle, gently pushing the attachment onto the handle and turning to 'click' into place.
5. Plug the product into the mains power supply.
6. To turn the product on slide the speed/heat setting switch to position '1'.
7. Dry roots completely and dry length 90% dry, ready for styling.
8. To dry hair use the concentrator attachment.
9. Section the hair prior to styling. Style the lower layers first.
10. Select the desired temperature and speed setting using the switch on the
11. To increase the setting slide the heat/speed setting switch to position '2'.
Root Boost Attachment
This is designed to create voluminous hair at the roots while it dries Push the root boost
slowly into your roots towards the centre of your head whilst drying it. Allow the hair to
push against the root boost. Lift the root boost up pulling hair at a right angle to your head
whilst drying. Repeat until you have dry, voluminous hair.
4
6. Concentrator
7. Speed/heats setting switch
8. Attachment release switch
9. Storage case (not shown)
10. 3m salon length swivel cord
handle.