Remington Keratin Protect AS8810 Manual Del Usuario página 4

Ocultar thumbs Ver también para Keratin Protect AS8810:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
ENGLISH
• If the supply cord of this unit becomes damaged, discontinue use immediately
and return the appliance to your nearest authorised Remington® service dealer
for repair or replacement in order to avoid a hazard.
Do not allow any part of the appliance touch the face, neck or scalp.
Keep the power plug and cord away from heated surfaces.
Do not use attachments other than those we supply.
Do not use the appliance if it is damaged or malfunctions.
Do not twist or kink the cable, or wrap it round the appliance. Check the cord regularly
for any sign damage.
This appliance is not intended for commercial or salon use.
WARNING: Contains traces of nuts.
PARTS
1. 1000 Watt power handle
2. 50mm thermal mixed bristle brush
3. 40mm thermal soft bristle brush
4. Root boost attachment
5. 2-way rotation switch
6. Temperature setting switch
INSTRUCTIONS FOR USE
Wash and condition your hair as normal.
Squeeze out excess moisture with a towel and comb through.
Select your attachment before you turn on the appliance.
To Secure Attachments to the Handle
Align the arrow symbols (d) on the attachment locking ring with the centre of the
channels around the edge of the power handle locking ring and push together.
Turn the attachment locking ring firmly clockwise in the direction of the lock arrow (+
L) to secure the power handle and the attachment together.
Dry length and roots partially prior to styling.
Tip: for best results aim for 80% dry hair.
Section the hair prior to styling. Style the lower layers first.
Plug the product into the mains power supply
Start styling on lower temperature first. Select the appropriate temperature for your
hair type using the temperature setting switch on the base of th styler.
To increase the temperature turn the temperature setting switch to position '1' for low
heat, '2' for high heat and position 'C' for the cool setting.
NOTE: The Brush attachments will only start rotating when a temperature setting has
been selected.
4
7. Attachment locking ring
8. Power handle locking ring
9. Cool setting
10. Inlet grille
11. Hanging loop
12. 3m swivel cord
Tabla de contenido
loading

Tabla de contenido