Brandson Equipment 304730 Manual Del Usuario página 18

• The appliance is ready and can now be used to vacuum, for e.g. ash.
• Move the aluminium pipe closely, slowly and evenly over the dirt. Always
make sure that the product is upright.
5. Disassembling the hose
To disassemble the hose, slightly rotate the end attached to the lid in coun-
ter-clockwise direction and remove it by pulling lightly.
6. Filter
The appliance has a HEPA filter (6) on the back of the lid.
Switch the vacuum cleaner off and disconnect it. Remove the lid from the con-
tainer of the pre-separator.
Rotate the lid so that you can see the filter. Now you can simply remove the filter.
7. Cleaning and Care
Disconnect the mains adapter from the socket before cleaning.
Clean the product using a slightly moist cloth.
Open the lid and empty the container into an appropriate garbage can.
Caution! Make sure that the vacuumed ash has completely cooled down.
Remove the filter from the appliance and empty the dust compartment.
18
English