EQUATION EQH-70 Instrucciones Para Instalación, Uso Y Mantenimiento página 17

3. Remove the two screws that hold the front
part of the body (one screw on either side of
the housing).
4. Use a 6 mm Allen key to remove the four
screws holding the EQH 70 fireplace to the
supporting structure (these screws are located
on the top section of the log chamber).
5. Use a 5mm Allen key to remove the screw
that holds the external body to the supporting
structure (this screw is located on the top
section of the log chamber).
17