Fellowes FORTISHRED 3850C Manual De Instrucciones página 4

ADVANCED PRODUCT FEATURES
SilentShred™ Technology
SilentShred™ noise quality
shreds without noisy disruptions
SHEET CAPACITY SENSOR
Eliminates frustrating jams by preventing overloads.
Electronically measures paper thickness to prevent
paper jams:
Up to RED: Too many sheets have been
inserted. Automatic reverse of paper.
Up to YELLOW: Maximum sheet capacity.
Up to GREEN: Normal sheet capacity
during shredding process.
PRODUCT MAINTENANCE
CLEANING AUTO-START INFRARED SENSORS
Paper detection sensors are designed for maintenance free operation. However,
on rare occasions the sensors may become blocked by paper dust causing the
motor to run even if there is no paper present
located in the center of the paper entry).
TO CLEAN THE SENSORS
1
2
Turn off and unplug
Locate Auto-start
shredder infared sensor
TROUBLESHOOTING
Bin Full Indicator: When illuminated, the shredder waste bin is full and needs to be emptied. Use Fellowes waste bag 3604101.
Safety Shield Indicator: When flashing alternatively with On/Off ( ) LED, safety shield is open and shredding will stop. To resume shredding, make sure safety shield is closed.
Door Open Indicator: When flashing alternatively with On/Off ( ) LED, safety shield is open. To resume shredding, make sure the door is closed.
Paper Capacity Indicator: When flashing blue, too much paper is inserted. Shredder will automatically stop and reverse paper. See Paper Jam section below.
R
Overheat Indicator: When flashing alternatively with On/Off ( ) LED, shredder requires a 10-15, minute cool down period. When ( ) is blue, resume shredding
PAPER JAM
1 2
Gently pull uncut paper
When flashing blue,
from paper entry
too much paper is
inserted. Shredder
will automatically stop
and reverse paper
Sheet Capacity Sensor
Helps prevent paper jams
by indicating sheet capacity
levels during the shredding
process
(Note: two paper detection sensors are
3 4
Use thin, long-handled brush
Clean any contamination
to clean sensors. Make sure from the paper sensors
brush is clean and dry
15
3 4
If necessary, press
Shred 1 sheet of
Reverse (R) to run
paper to clear
shredder in reverse and
cutters. Resume
then pull uncut paper
normal shredding
from shredder
Safety Shield
30
Electronically controlled
shield stops shredder
when opened for
advanced safety
OILING SHREDDER
All shredders require oil for peak performance. If not oiled, a machine may experience
diminished sheet capacity, intrusive noise when shredding and could ultimately stop
running. To avoid these problems, we recommend you oil your shredder each time you
empty your waste bin.
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
1
2
Set to Off (O) *Apply oil
across entry
*Only use a non-aerosol vegetable oil in long nozzle
container such as Fellowes 35250
Auto Shut Off
After 30 minutes of
inactivity, shredder
automatically turns off for
zero energy consumption
3
Set to Reverse (R) 2-3
seconds
15
3