Maintaining The Waterproof Function; Replace Consumable Products - Olympus PT-EP12 Manual De Instrucciones

8. Maintaining the Waterproof Function

The O-ring is a consumable product. Before each use, perform proper maintenance. Always be sure to
perform the O-ring maintenance operation as described below. Neglecting this maintenance may
become the cause of water leakage.
Perform at the location without sand or dust, after washing and drying your hands.
Remove the O-ring
Refer to P.11.
Remove any sand, dirt, etc.
Refer to P.11.
How to Apply Grease to the O-ring
Refer to P.12.
Install the O-ring
Refer to P.12.

Replace consumable products

• The O-ring is a consumable product. Independent of the number of times the Case is used, it is
EN
recommended that the O-ring should be replaced by a new piece after a year has passed.
• Deterioration of the O-ring is accelerated by the usage conditions and the storage conditions. Replace
the O-ring even before a year has passed if it shows signs of damage, cracking or loss of elasticity.
CAUTION:
• Please use genuine Olympus silicone grease, silica gel and O-ring.
• Do not try to replace the O-ring by yourself.
• We recommend to perform the check periodically.
EN 21