Installation; Instructions For Installation; Installation Of The Internal Unit; Removal Of The Front Panel - Olimpia splendid SHERPA AQUADUE S2 BIG Instrucciones Para La Instalación, Uso Y Mantenimiento

2 - INSTALLATION

2.1 - INSTRUCTIONS FOR INSTALLATION

To obtain the best results and optimum performance, follow the instructions for correct installation provided
in this manual.
A failure to implement the indicated standards, which may cause a malfunction
of the appliances, relieves OLIMPIA SPLENDID from any form of warranty and
from any liability for possible damages caused to people, animals or things.
The electrical system must be compliant with legal standards, must respect
the data in the technical data sheet and be must be equipped with an efficient
ground system.
The appliance must be installed in such position as to allow easy maintenance.

2.2 - INSTALLATION OF THE INTERNAL UNIT

Prepare:
• Two dowels with a diameter of 10 mm for wall fixing suitable for the type of support.
• A lateral and upper free space of at least 25 cm, sufficient to allow for the removal of the covers for
ordinary and extraordinary maintenance operations.
• A nearby water drain.
• A compliant power supply, near the internal unit.
• A water supply for filling of the hydraulic circuit.
• Communication cable between internal and external unit (see par.3.6.2).
Refer to "Fig.5" for the position of the pipes.
The internal unit must be fixed to the wall at head height inside the residence.
Refer to "Fig.5" for installation spaces.
For installation with the support for wall mounting, use the supplied template and secure using appro-
priate dowels.
For installation without the support for wall mounting, place the unit on the specific positioning kit B0675
supplied with the appliance.
2.2.1 - Removal of the front panel (Fig.3)
• Open the right door (D) on the front panel (P) and turn it rightwards.
• Undo the fixing screw (X) located inside the right door (D).
• Lift the front panel (P) upwards and remove it.
EN - 9
AQUADUE BIG