Wiegand Output; Postal Lock - LiftMaster myQ Business CAPXL Manual De Instalación

INTRODUCTION

Wiegand Output

Disconnect power BEFORE making electrical connections. The CAPXL / CAPXLV offers a Wiegand output capable of 26 bit
transmission of the following data:
• Success Call with access granted by the resident. The CAPXL / CAPXLV will provide a myQ
followed by the Directory Code of the resident that granted access.
And/Or
• Successful access through Entry Code. The CAPXL / CAPXLV will provide a myQ
successful Entry Code.
And/Or
• Successful access with a Wiegand credential. The CAPXL / CAPXLV will pass along the successful credential Facility Code and ID.

Postal Lock

1. Remove the wing nut and plug. Discard the
wing nut and plug.
2. Remove 4 mounting nuts from studs.
3. Install postal lock using 4 nuts from step 3.
4. Cut the factory installed wire tie from the
postal lock switch.
5. The postal lock switch is wired from the
factory.
PRE-INSTALL
Data-0
Ground
Data-1
Third Party Access System
Wiegand Input
(This Device/Reader Must DOOR BOARD 1
be Listed to UL 294.)
INSTALL
ON
23
NETWORK ACCESS CONTROL
® Business™ specifi ed facility code
® Business™ specifi ed facility code followed by the
Wing Nut and Plug
Postal Lock