Preparing The Appliance For Operation - Unold 48360 Instrucciones De Uso

it must be replaced by the
manufacturer or by the man-
ufacturer's customer service
organisation, or by a person
CAUTION:
The appliance becomes very hot during operation!
Never open the housing of the appliance. This can result in
electric shock.
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

PREPARING THE APPLIANCE FOR OPERATION

1. Before using the appliance for the
first time, we recommend that you
wipe off the two non-stick baking
surfaces with a damp cloth.
2. Open the window during the burn-
in phase that now follows.
3. Close the appliance, plug the
mains plug of the appliance into
an electrical
50 Hz). The red operating indica-
tor light is illuminated and shows
that the heating circuit is in opera-
tion.
4. Heat up the appliance for approx.
10 minutes.
5. After pre-heating the appliance
there may already be visible traces
of use; however, these do not affect
the function of the appliance and
do not constitute grounds for a
complaint.
6. Before using the oreshki maker for
the first time, lightly grease both
baking surfaces with a brush with
outlet (230 V~,
Copyright UNOLD AG | www.unold.de
with similar qualifications,
to prevent hazards.
a heat-resistant shortening, such
as margarine. Because the baking
surfaces of the appliance have a
non-stick coating, they must only
be greased prior to making the
first oreshki, thereafter greasing
is no longer required.
7. If a mild odour becomes percep-
tible after heating up your new
appliance for the first time, it is
completely harmless.
Caution:
recommend that you not eat
the very first oreshki prepared
in the appliance; dispose of
them. For each subsequent use
of the appliance, naturally this
is no longer necessary!
We always
17