Tabla de contenido
Connecting the Interface Cable
Refer to the photograph for the location of the various interface cable
connectors on the back of the printer.
Interface cables are not supplied with the printer. ThinWire Ethernet
cables must be connected to the printer using a T-Connector. The
T-Connector must also use a 50-ohm terminator if the printer is the
last device connected to the cable.
1
2
ThickWire Ethernet (or optional Twisted-Pair) Connector
ThinWire Ethernet Connector (must be used with T-Connector)
Interface Connectors for future options
Note
3
Connecting the Interface Cable 3–1
3
009520
MLO-
C
Tabla de contenido
