Mitsubishi Electric CITY MULTI R410A Serie Manual De Operación página 14

Using the Auto Off Timer
1. This timer begins countdown when the unit starts, and shuts the unit off when
the set time has elapsed.
2. Available settings run from 30 minutes to 4 hours, in 30-minute intervals.
Note:
*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same time.
*2. The Auto Off timer will not operate when any of the following conditions is in
effect.
The timer is off; the system is in malfunction state; a test run is in progress; the
remote controller is undergoing self-check or remote controller check; the user
is in the process of selecting a function; the user is in the process of setting the
timer; the system is under central control. (Under these conditions, ON/OFF
operation is prohibited.)
TEMP.
B
MENU MENU
BACK BACK MONITOR/SET
PAR-W21MAA CLOCK CLOCK
2 A
How to Set the Auto Off TIMER
2 3
AFTER
1. Be sure that you are at a standard control screen, and that the Auto Off timer
indicator is visible in the display (at 1).
When something other than the Auto Off Timer is displayed, set it to AUTO
OFF TIMER using the function selection of remote controller (see 3.[3]–3 (3))
timer function setting.
2. Hold down the TIMER MENU button B for 3 seconds, so that the "Set Up"
appears on the screen (at 2).
(Note that each press of the button toggles the display between "Set Up" and
"Monitor".)
3. Press the appropriate Set Time button A as necessary to set the OFF time (at
3).
button 4 to lock in the setting.
4. Press the CIR.WATER
Note:
Your entry will be cancelled if you press the Mode (Return) button 2 before pressing
the CIR.WATER button 4.
5. Press the Mode (Return) button 2 to complete the setting procedure and re-
turn to the standard control screen.
6. If the unit is already running, the timer starts countdown immediately. Be sure
to check that the timer setting appears correctly on the display.
14
AFTER OFF
AUTO OFF
ON/OFF
ON/OFF ON/OFF INITIAL SETTING INITIAL SETTING
CIR.WATER CIR.WATER
4
DAY CHECK CHECK TEST TEST
CLEAR CLEAR
9
Timer Setting
OFF
1
AUTO OFF
Checking the Current Auto Off Timer Setting
4 5
TIMER
AFTER
1. Be sure that the "Auto Off" is visible on the screen (at 1).
2. Hold down the TIMER MENU button B for 3 seconds, so that "Monitor" is
indicated on the screen (at 4).
• The timer remaining to shutdown appears at 5.
3. To close the monitor and return to the standard control screen, press the Mode
(Return) button 2.
To Turn Off the Auto Off Timer...
• Hold down the TIMER ON/OFF button 9 for 3 seconds, so that "Timer Off"
appears (at 6) and the timer value (at 7) disappears.
AFTER
˚C
6
• Alternatively, turn off the unit itself. The timer value (at 7) will disappear from the
screen.
To Turn On the Auto Off Timer...
• Hold down the TIMER ON/OFF button 9 for 3 seconds. The "Timer Off"
indication disappears (at 6), and the timer setting comes on the display (at 7).
• Alternatively, turn on the unit. The timer value will appear at 7.
AFTER
˚C
6
Timer Setting
OFF
1
AUTO OFF
7
OFF
˚C
AUTO OFF
7
AUTO OFF
7
OFF
˚C
AUTO OFF