Cooke & Lewis CLIND60E Manual Del Usuario página 4

Ocultar thumbs Ver también para CLIND60E:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

5 WARNING: Use only the same
5
size of fittings and mounting
screws as recommended in
this instruction manual. Failure
to follow these instructions may
result in electrical hazards.
5 WARNING: Switch off the
5
appliance at the mains supply
before carrying out any
maintenance work.
5 WARNING: Accessible parts
5
may become hot when used
with cooking appliances.
Children less than 8 years of
age shall be kept away unless
continuously supervised.
Care should be taken to avoid
touching the appliance.
5 WARNING: Means for full
5
disconnection must be
incorporated in the fixed
wiring in accordance with the
local wiring installation rules
for your country. An all-pole
disconnection switch having a
contact separation of at least
3mm in all poles should be
connected during installation.
5 WARNING: Only clean the
5
hob when it has cooled down
sufficiently. When the power
to the cooktop is switched off,
there will be no residual heat
indication but the cooking zone
may still be hot. Take extreme
care!
5 WARNING: Unattended
5
cooking on a hob with fat or
oil can be dangerous and may
result in fire. NEVER try to
extinguish a fire with water, but
switch off the appliance and
then cover flame e.g. with a lid
or a fire blanket.
5 CAUTION: The cooking
5
process has to be supervised.
A short term cooking process
has to be supervised
continuously.
5 WARNING: Danger of fire: do
5
not store items on the cooking
surfaces.
5 WARNING: Use only hob
5
guards designed by the
manufacturer of the cooking
appliance or indicated by the
manufacturer of the appliance
in the instructions for use
as suitable or hob guards
incorporated in the appliance.
The use of inappropriate
guards can cause accidents.
5 WARNING: If the surface
5
is cracked, switch off the
appliance to avoid the
possibility of electric shock.
5 The appliance is not intended
5
to be operated by means of
an external timer or separate
remote-control system.
5 If the supply cord is damaged,
5
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a safety hazard.
IMPORTANT:
• Heavy-duty scourers, some
nylon scourers and harsh/
abrasive cleaning agents may
scratch the glass. Always
read the label to check if your
cleaner or scourer is suitable.
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

3663602494362

Tabla de contenido