Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN – Instructions for use
Permitted use
The soil stand bracket is intended solely for fi
xing the following Kermi steel panel radiators
of type 20 - 33 subject to assignment of the
application classes.
App. class 3 = BH 300 – 600 mm:
•
FK0, FK0D, FTV, PK0, PK0D, PTV22, PTV33,
PLK22, PLK33, PLV22, PLV33
App. class 2 = BH 300 – 954 mm:
•
FK0, FK0D, FH0, FTV, PK0, PK0D, PH0, PTV,
PLK, PLV
Use for any other purpose is considered impro
per use and is therefore not permitted!
Maintenance and cleaning
Special maintenance of the soil stand brackets
is not required.
Clean the soil stand brackets only with mild,
►
non-abrasive commercial cleaning agents.
Complaint
Please contact your specialist in case of dam
age!
Have the installation and repairs done only
►
by an installation engineer otherwise your
warranty claim shall lapse in accordance
with the law for liability for material de
fects.
Disposal
Packaging and any parts that are not need
►
ed should be recycled or disposed of prop
erly. Observe local regulations.
EN – Installation instructions
The soil stand brackets may only be installed by
an installation engineer.
Safety instructions
1.
Thoroughly read through the assem
►
bly instructions before starting installation.
►
Observe all instructions regarding the in
stallation site, technical data, application
limits, floor conditions and wall spacing.
►
After installation pass the instructions on
to the end user.
Store and transport the installation mate
►
rial in the protective packaging only.
4
WARNING
Risk of injury!
Take the weight of the radiator into ac
►
count (see manufacturer's data).
At 25 kg and above, work with lifting
►
equipment or several persons.
Packaging and delivery
Remove radiator packaging on the bottom
►
and rear side in the area of the bottom lugs
(Fig. 1).
Check package contents of the soil stand
►
brackets for completeness.
9
2b
Designation
1
Bracket foot H 450
1
Bracket foot H 750
2a Carrier pipe T22–T33 VM 1
2b Carrier pipe T33 K+V
3
Covering cap
4
Console bracket
5
Support
6
Hook
7
Washer
8
Hexagonal nut
9
Threaded pin
5
6
1
4
3
2a
7
8
3
1
–
1
–
–
1
–
1
1
–
–
–
–
1
1
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
Tabla de contenido
