Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installing a DIMM
1.
Locate the DIMM soc��ets in the motherboard.
2.
Unloc�� a DIMM soc��et by pressing the retaining clips outward.
3.
Align a DIMM on the soc��et such that the notch on the DIMM matches the
brea�� on the soc��et.
4.
�ush the DIMM to the soc��et until the retaining clips snap inward.
CAUTION:
•
Unplug the power supply before adding or removing DIMMs. Failure to do so may
cause damage to the motherboard and/or components.
•
A DDR2/DDR3 DIMM is keyed with a notch so that it fits in only one direction.
Do not force a DIMM into a soc��et to avoid damaging the DIMM.
Installing an expansion card
1.
Remove the metal cover opposite
the slot that you intend to use.
3.
Insert the card connector to the
slot, then press the card firmly
until it fits in place.
4.
Replace the metal brac��et loc��.
1
Installation manual
2.
Remove the metal brac��et loc��.
2
4
3
Tabla de contenido
